Rom Patcher S60 OS9.x + Parches [Parchear ROM: HACK OS9.x]

Este apartado es el dedicado a todas aquellas cuestiones o aportaciones dentro del campo del desarrollo y la modificación de nuestros terminales, tanto en el aspecto técnico como en el de aplicaciones. [Tema Firma de Apps y Seguridad Symbian]

Moderadores: Moderadores Smartphones, Staff CNS

Rom Patcher S60 OS9.x + Parches [Parchear ROM: HACK OS9.x]

por pummette » 28 Apr 2008, 23:20

El hack de la 9.1 ha abierto muchas puertas! Están saliendo unos parches para la Rom que permiten habilitar menus escondidos, instalar aplicaciones unsigned y mucho mas!

<< Se ira editando este hilo para añadir los distintos parches que vayan saliendo para completarlo lo mejor que podamos >>

Bajad esto:

http://cnshost.es/download.php?file=95a ... d77c990667


EDICION por Psycho

Info aportada por Larut:

Version Instalable en ".sis" de la ya mencionada app Rom Patcher y la version para sobreescribir en español (Se ha cambiado disable caps por deproteger y enable caps por proteger)

:arrow: http://rapidshare.com/files/119352809/R ... r.zip.html

* Para telefonos que no lo tienen instalado intalar directamente en memoria telefono.
* Para telefonos que ya lo tienen instalado primero lo instalamos en la tarjeta de memoria, luego lo desistalamos y lo volvemos a intalar ya en la memoria del telefono, así podremos desistalar la aplicacion en un futuro.

Nueva Edicion por Psycho:

Version Nueva de Instalabe Rom Patcher con Opciones de Autorun:

:arrow: http://cnshost.es/download.php?file=b78 ... 7956f4876b

RomPatcher VERSION 3.1:

:arrow: http://cnshost.es/download.php?file=da5 ... 7f5accdd0f

Editado por pummette el 02/05/08

Ha salido la version para FP1, se puede bajar de aqui:

http://cnshost.es/download.php?file=fda ... f0fd51f007

Edicion por Psycho Agosto 09:

RomPatcher+ v2.0 S60v3/S60v5 Final


ImagenImagen


RomPatcher+ is an improved and fixed version of the RomPatcher software developed

by ZoRn

This is the list of the main differences in comparison with RomPatcher by ZoRn:

- New: it is now possible to apply/remove patches with just 1 click.
- New: added vertical scrollbar.
- New: introduced support for a new tag: "+SuperPage" which allow to patch the RAM area where is stored the SuperPage.
- New: two new options available "Dump Rom" and "Dump SuperPage".
- Fixed: Kern-Exec0 error when closing RomPatcher after a patch was applied.
- Fixed: doesn't unexpectedly crash when using large and complex patches.
- Improved: the shadow ram memory is now fully released when a patch is removed.
- Improved: better compatibility (supports also the new OmniaHD, 5630, E52 and probably future devices).
- Improved: the "Patch Info..." option shows all the information lines contained in the patch.

Warning Message:

Feel free to post RP+ v2.0 on forums or everywhere you like, I want just kindly ask you to include the warning message below which is important for the survivor of the

project:

Warning: If you like this software then support RP+ with a donation, otherwise its development will be definitely suspended on 7th September.
http://www.symbian-toys.com/rompatcherplus.aspx

Change-Log v2.0:

+ Fixed: The message "Application not compatible with the phone" is not shown anymore.
+ Fixed: Replaced the Open4All_N96 templove's version with wadowice's version.
+ Fixed: Sometimes the green\red patch icon wasn't showed properly
+ Improved: Touch Support, the tap will select the patch, a tap on a selected patch will apply/remove it
+ Improved: Patches can be placed in any drive, RP+ will follow the order Z: -> A: and will use the first drive which contain the \patches\ folder
+ Improved: Error messages will report the patch's name also.
+ New: Popup when launching RP+ to remember to everyone the 6th September deadline.
+ New: ApplyAll/RemoveAll options to quicly Apply/Remove all the patches.
+ New: Donate options menu...
+ Removed: Apply/Remove options have been removed because redundant. Just click on a patch to apply/remove it.
+ Removed: The annoying popups for apply patch have gone Smile yeppi!!!
+ Removed: The advanced menu' has been temporary removed, it will came back again with more options available like "Dump/View any user choosen area of memory"...


How to install:

There are 3 different ways to install RomPatcher+

1) If your phone has been hacked to allow installation of unsigned .sis then install RomPatcherPlus0.9(500).sis
2) If your phone has been hacked and has the Leftup root ca, then sign the RomPatcherPlus0.9(500).sis using the Leftup certificate and install it.
3) Otherwise, you can sign and install the "Lite Version", using a DevCert or OpenSigned Online. But, in this case, you MUST also manually copy BOTH the files patcher.ldd and patchershadow.ldd in c:\sys\bin\ folder

Patcher.ldd Not Found Error:

If you launch RP+ immediately after it has been installed you could get the "patcher.ldd not found" error.
Just reboot the device and launch again RP+

Upgrade Error:

If you installed any previous beta version and you got this error when installing final version, please delete both e:\patches\open4all.rmp and e:\patches\open4all_n96.rmp and try again.

:arrow: http://cnshost.es/download.php?file=6d4 ... a5964d580d

Edicion por Psycho Octubre 09:

RomPatcher+ v2.2 S60v3/S60v5 SymbianOs9.x (Final Version)


ImagenImagen


RomPatcher+ is an improved and fixed version of the RomPatcher software developed by ZoRn.
Using RomPatcher+ it is possibile to reach a new level of customization for you Symbian phone.

This is the list of the main differences in comparison with RomPatcher by ZoRn:

- New: it is now possible to apply/remove patches with just 1 click.
- New: added vertical scrollbar.
- New: introduced the new command "+SuperPage" which allow to patch the RAM area where is stored the SuperPage.
- New: introduced support for a new commands, info: return: error: check the demo1-4.rmp patches included.
- New: introduced #ifdef, #ifndef, #else, #endif, #define statements. This will allow to retrieve system values at runtime to create more flexible and powerful patches. Check the ReadMe_Macros.txt for all the details.
- New: you can search / filter the patches in the list. Just start typing the patch name to apply the filter.
- New: wildcard ?? support for patches.
- Fixed: Kern-Exec0 error when closing RomPatcher after a patch was applied.
- Fixed: doesn't unexpectedly crash when using large and complex patches.
- Fixed: RP+ can correcly patch contiguous shadow ram pages without any crash.
- Improved: the shadow ram memory is now fully released when a patch is removed.
- Improved: better compatibility (supports also the OmniaHD, 5630, E52 and probably future devices).
- Improved: the "Patch Info..." option shows all the information lines contained in the patch.

Warning Message:

Feel free to post RP+ v2.2 on forums or everywhere you like, I want just kindly ask you to include the warning message below which is important for the survivor of the project:

Warning: If you like this software then support RP+ with a donation.

Change-Log v2.1 > v2.2:

+ New: it is now possible to search / filter the patches in the list. Just start typing the patch name to apply the filter.
+ New: the wildcard "??" is now available for patch-makers.
eg. SnR:sys\bin\installserver.exe:0011????02233043:0028??E00B20C043
(NOTE: 3rd byte will be kept unchanged)
+ Improved: changed installer to place Open4All_RP+ patch in the proper drive.
+ Fixed: in the SnR command, only the first instance was patched successfully. Wasn't possible to patch further instances of the same byte pattern.
+ Fixed: memory corruption when the patch contains 2 or more changes to a RAM memory address (not in the ROM range) and the "apply patch" fails.
+ Fixed: red-icon is shown like in RP by ZoRN, ie. if the patch doesn't perform any change to the memory the red-icon will be shown (eg. when a patch contains only comments or unmatched SnR lines)

How to install:

There are 3 different ways to install RomPatcher+

1) If your phone has been hacked to allow installation of unsigned .sis then install RomPatcherPlus_2.2.sis
2) If your phone has been hacked and has the Leftup root CA, then just install the RomPatcherPlus_2.2.sisx
3) Otherwise, you can sign and install the "Lite Version", using a DevCert or OpenSigned Online. But, in this case, you MUST also manually copy BOTH the files patcher.ldd and patchershadow.ldd in c:\sys\bin\ folder

Patcher.ldd Not Found Error:

If you launch RP+ immediately after it has been installed you could get the "patcher.ldd not found" error.
Just reboot the device and launch again RP+

Useful tip for patch-makers:

If your patch uses some features of RP+ v2.2 and above (like ?? wildcard) I suggest you to include in your patch a check, using the code below:

Código: Seleccionar todo
#ifdef RP+VERSION_2.0
   #define NOT_COMPATIBLE
#endif

#ifdef RP+VERSION_2.1
   #define NOT_COMPATIBLE
#endif

#ifdef NOT_COMPATIBLE
   error:Please update to RP+ v2.2 or above to use this patch!
#else
   ; your patch code goes here...
   ; your patch code goes here...
   ; your patch code goes here...
   ; your patch code goes here...
#endif


Descarga




BackON escribió:
RomPatcher+ v2.3 S60v3/S60v5 SymbianOs9.x (Final Version)


ImagenImagen


As almost all of you know this software is for aplying patches to rom memory
( come on its the name of it)
ok here is the new version and the change log
Change-Log v2.2 > v2.3:
+ New: now RP+ can be integrated in the cooked ROM firmware
+ New: added Universal InstallServer patch (N95 and many other devices are supported too)
+ Fixed: issue when two patches were using the same shadow-page. When one patch got disabled, the other patch got disabled too.
+ Improved: patches are now installed during first launch of RP+ using the file RP_Patches.zip
+ Removed: installer executable is now useless, since the RP_Patches.zip will be processed by RP+ during first launch.
I almost forgot this:
How to install:
There are 3 different ways to install RomPatcher+
1) If your phone has been hacked to allow installation of unsigned .sis then install RomPatcherPlus_2.3.sis
2) If your phone has been hacked and has the Leftup root CA, then just install the RomPatcherPlus_2.3.sisx
3) Otherwise, use your DevCert or OpenSigned online to sign and install the "Lite Version". But, in this case, you MUST also manually copy BOTH the files patcher.ldd and patchershadow.ldd in c:\sys\bin\ folder
Patcher.ldd Not Found Error:
If you launch RP+ immediately after it has been installed you could get the "patcher.ldd not found" error.
Just reboot the device and launch again RP+

Descarga

NOTA: Añadido tambien al hilo oficial de Rompatcher donde podeis encontrar TODOS los Parches aqui posteados junto con TODAS LAS VERSIONES de Rompatcher:

viewtopic.php?f=55&t=62586&p=556612#p556612





Imagen

ROMPatcher by -=ZoRn=-

Installation:

1. First you need install MetroTRK on your mobile and launch it.
2. Change address (and/or checkVal) in RPInstaller.ini to yours.
For Symbian 9.1 address is 60000148 for 9.2 it C0000148
3. Launch RPInstaller.exe, select MetroTRK COM port and press Install
4. If no errors occurs then you have ROMPatcher installed on your mobile Imagen

Patches:

Patches should be in E:\Patches directory on mobile and have rmp extention.
Symbols count for addresses and patch data must divided by 2. 12345 - WRONG, 012345 - RIGHT.

Example patch:

This line (first 256 symbols, I think it enough) will be shown while you choose "Patch info" submenu.\nThis patch just for test. Replace Z:\resource\versions\sw.txt

Lines that dont start with one of patch method (like this one ) just ignored.
abs:F93C70A6:34002E0030003600330032002E0030002E003 30038:35002E0038003800380038002E0037002E00360035

;This line also ignored. Next line show relative patch method. Doing the same as line above, but not only for N80 FW 4.0632.0.38
rel:resource\versions\sw.txt:06:34002E003000360033 0032002E0030002E00330038:35002E0038003800380038002 E0037002E00360035

//Another method of patches above - Search'n'Replace
SnR:resource\versions\sw.txt:34002E003000360033003 2002E0030002E00330038:35002E0038003800380038002E00 37002E00360035


Editado por pummette

Vamos a ver, para la primera parte:

1. Instalad el TRK que está en el adjunto o utilizar el que teniamos para hackear el movil.
2. Abrid el RPInstaller.ini y cambiar (o no) el valor, según el movil que tengais:
Symbian 9.1 60000148
Symbian 9.2 C0000148

3. Conectar el PC en modalidad PCSuite y ejecutar el TRK.
4. Mirad el puerto COM en administrador de dispositivos.
5. Ejecutar el RPInstaller.exe y poned el mismo numero de COM

Saldrá esto:

Imagen

Si todo ha salido bien, en el movil:

Imagen

Lo mas importante es esto:

Imagen

Si, el Rom Patcher permite habilitar o no los Caps!!!!

Saludos

Ahora nos ponemos con los parches :wink:

From FCA00000

patch: EnableHiddenMenus

Save this as
e:\Patches\EnableHiddenMenus.rmp
and activate it.

Código: Seleccionar todo
; *** EnableHiddenMenus 1.0 ***
; *** Enable Hidden Menus ***
; Author: fca00000 , fca00000-at-yahoo-dot-es
; Date: 2008.04.18
; Firmware: tested on N80 v 5.0719.02  . Might work on preFP1+FP1
;
; In the main applications menu some options disappear if you select a program or a folder.
; This patch shows all of them, allowing to rename applications and creating sub-folders inside folders.
; Seems to work on preFP1, although on FP1 it doesn't show the menu to rename apps.
;
; For the curious people: I changed eikcoctl.dll in
; method CEikMenuPane::DeleteMenuItem
; so that it simply returns
;F8F29D56                 PUSH    {R0,R1,R4-R7,LR} ; patch to   BX LR
;F8F29D58                 SUB     SP, SP, #4
;F8F29D5A                 LSLS    R6, R0, #0
;F8F29D5C                 LDR     R0, [R0,#0x70]
;F8F29D5E                 MOVS    R7, #0
;F8F29D60                 CMP     R0, #0
;F8F29D62                 BEQ     loc_F8F29D66
;F8F29D64                 LDR     R7, [R0,#4]
;
; As far as I know, nothing is broken. But I decline all responsability, of course.
; Anyway, here it is. Enjoy
; end of EnableHiddenMenus
SnR:sys\bin\eikcoctl.dll:F3B581B00600006F0027:704781B00600006F0027



Editado por pummette

A ver, creamos una carpeta en E que se llame Patches

Imagen

Bajamos este fichero que os he preparado:

http://cnshost.es/download.php?file=262 ... efdbba1dc0

Y lo ponemos así como está en la carpeta Patches.

Ejecutamos el Rom Pathcer
Imagen

Y le damos a Opciones, Patch, apply:

Imagen

Esto está hecho :wink:

Editado por pummette

Meter este fichero en zip in E>Patches

Meter este fichero en e:\system\data\





patch: ChangeSwipolicyPath (allows installing unsigned apps)

Save as e:\patches\ChangeSwipolicyPath.rmp
Código: Seleccionar todo
*** ChangeSwipolicyPath 1.0 ***
; *** Change swipolicy path ***
; Author: phrig
; Released by: fca00000 , fca00000-at-yahoo-dot-es
; Date: 2008.04.24
; Thanks to -=ZoRn=- for his wonderful ROMPatcher and phrig for making this changes . I am just publishing and polishing it.
; Credits also go to Symbaali for his initial great discovery about that, back in 2007
; Firmware: tested on N80 v 5.0719.02  . Might work on preFP1+FP1
;
; Change path to swipolicy.ini in securitymanager.dll to e:\system\data\swipolicy.ini
; You also need to copy the file from Z: into E:
; then, you can modify it.
; I suggest:
; AllowUnsigned = true
; UserCapabilities = NetworkServices LocalServices ReadUserData WriteUserData UserEnvironment Location SurroundingsDD UserEnvironment NetworkControl SwEvent AllFiles NetworkControl DiskAdmin ProtServ TrustedUI DRM WriteDeviceData ReadDeviceData MultimediaDD PowerMgmt CommDD TCB
; with these changes, you might run some programs that are unsigned.
; Warning: not all unsigned programs can be installed. For example, if supplier is untrusted or certificate has expired.
; Warning: installing a program from untrusted sources is dangerous and might destroy your phone.
;
; For the curious people: the change is done in securitymanager.dll
;
; As far as I know, nothing is broken. But I decline all responsability, of course.
; Anyway, here it is. Enjoy
; end of ChangeSwipolicyPath
SnR:sys\bin\securitymanager.dll:1C0000007A003A005C00730079007300740065006D005C0064006100740061005C0073007700690070006F006C006900630079002E0069006E006900:1C00000065003A005C00730079007300740065006D005C0064006100740061005C0073007700690070006F006C006900630079002E0069006E006900






Disable Java Question

Código: Seleccionar todo
; *** Disable_java_question 1.0 ***
; Author: Santehnik aka Disabled , Santehnik.ua@gmail.com
; Date: 2008.04.25
; Firmware: tested on N95 8gb v 15.0.015 . Might work on preFP1+FP1
SnR:sys\bin\MIDP2SECURITYPOLICYV2.DLL:7a003a005c00:63003a005c00






No camara sound

Código: Seleccionar todo
; *** No Camera Sound 1.1 ***
; *** No Camera Sound ***
; Author: NightShift79
; Date: 2008.04.25
; Firmware: tested on N82 v 20.0.062 - Might work also on preFP1
;
; You're annoyed of that click sound when taking pictures?
; This patch mutes the sound if cam sound 4 is choosen in the settings.
; Also you have to place the nocamsound.wav in E:\SOUNDS\DIGITAL
;
; For the curious people: I changed CamMojave.exe.
; I have changed z:\system\sounds\digital\CamMojaveCapture4.wav to E:\sounds\digital\nocamsound.wav
;
; As far as I know, nothing is broken. But I decline all responsability, of course.
; Anyway, here it is. Enjoy
; end of NoCameraSound
SnR:sys\bin\CamMojave. exe:7A003A005C00730079007300740065006D005C0073006F0075006E00640073005C0064006900
670
06900740061006C005C00430061006D004D006F006A0061007600650043006100700074007500720
0650034002E007700610076:
65003A005C0073006F0075006E00640073005C006400690067006900740061006C005C004E006F00
630061006D0073006F007500
6E0064002E00770061007600000000000000000000000000000000000000000000000000000000






<< Edicion por Psycho para añadir Patch's >>

Change the default mobile command Key Combinations Patch 1.0

Original: CODeRUS
Change the default number of phone orders, such as query system version, IMEI, Georgia and other instructions enter the code
Phone will need to install rompatcher
1st Please see This posts [ ROMPatcher by ZoRn & FCA00000]


Do not try to novice, Laoniao prudent changes for reference purposes only and own risk!

Código: Seleccionar todo
; *** Key Combinations Patch 1.0 ***
; *** Change key combination for show info ***
; Author: CODeRUS
; Released by: CODeRUS
; Date: 2008.05.03
; Thanks to -= ZoRn =- for his wonderful ROMPatcher and phrig for making this changes.
; Firmware: tested on 6290. Might work on preFP1 + FP1

; Will be changed * # # * # 0000 # 1234, 1234 can modify (unicode format)
SnR: sys \ bin \ phoneparser.dll: 2300300030003000300023:2300310032003300340023

; Will be changed to * # 06 # # * # 00
SnR: sys \ bin \ phoneparser.dll: 23003000360023:23003000300023

; Will be changed * # 7780 # # * # 6661
SnR: sys \ bin \ phoneparser.dll: 2300370037003800300023:2300360036003600310023

; Will be changed * # 7370 # # * # 6662
SnR: sys \ bin \ phoneparser.dll: 2300370033003700300023:2300360036003600320023

; Will be changed * # # * # 2820 # 8888
SnR: sys \ bin \ phoneparser.dll: 2300320038003200300023:2300380038003800380023

; Will be changed * # 92702689 # # * # 12345678
SnR: sys \ bin \ phoneparser.dll: 23003900320037003000320036003800390023:2300310032


Código: Seleccionar todo
* # 06 #
IMEI code, which is what we call the string of phone.
* # 0000 #
Phone version that will appear after a total of three lines of information, the first line is the cell phone software, the current version, the current version V5.27 is the latest version, this version is the second line software distribution date, this version of the publication time for the June 2004 28, is the third line phone model code.
* # 7370 #
Restore factory settings (soft-grid), this command is generally a mistake in the phone system or refuse the case of excessive use of grid-order front grid through third-party software packages or 6600 PC to backup your business card holder or The information needed for grid electricity, must maintain sufficient, not to take the charger grid machine, when the grid -
Show only "NOKIA" words are bright screen, not grid End Do not forced shutdown and pulling the battery, so as to avoid serious consequences, lattice machine to re-enter after the completion time and then resume your business card holder and information on the Georgia - Can restore all the original settings, will be the C: drive contents of all empty, and then write a new information system, note
Italy is the grid for this MMC card does not affect content.
* # 7780 #
Restore factory settings, equivalent to the menu - tools - set - set up the phone - conventional - the original settings, just pay attention to this order is to restore settings, different from the grid plane, after the resumption of business card holder, pictures, documents , And all other still exists, the reduction is only set up, some friends because I do not know how to set up wrong and can be changed back
To order the use of this.


:arrow: http://cnshost.es/download.php?file=ed8 ... 659b492955





EDICION por Psycho para añadir Parche de Rom

Parche para habilitar Instalacion de cualquier App Unsigned a trves del Hack

SwMail's Install ANY unsigned .sis/.sisx to your device

Imagen Imagen Imagen

No hace falta usar el ya conocido sistema de Binpda's SECMAN [Vease Tutorial de Acceso a Carpetas Privadas mediante el HAck o el de Firmar e Instalar Apps Unsigen sin necesidad de certificado SymbianSigned]

Instalar RomPatcher y Apptrk lo primero

"And keep it running in the background whilst connecting to your PC Suite."

Descargar segun modelo: FP1 o FP2. Seguir el Tutorial de la descarga

Todo lo que necesitas es aplicar el ZorN patch (ROMPatcher) y usar el parche c2z. Descargar el archivo installserver.exe en c:\sys\bin.
Aplicar c2c patch y listo .. a instalar lo que necesites o quieras.

Edito y añado (By Pummette):

Notas de Procedimientos:

Extrae:

z:\sys\bin\EFSrv.dll

Cópialo al PC en la misma carpeta donde tengas c2z.exe y ejecuta c2z.exe. Se crea el c2z.rpm.

Pásalo al móvil a e:\Patches

:arrow: http://cnshost.es/download.php?file=cd6 ... 039944acf6[/quote]




Edicion por Psycho para añadir Patch

Para este parche se recomienda usar RomPatch version 3.1 (Posteada en la parte superior de este mismo post) para que no haya reinicios del dispositivo. Ha y que estar pendiente del punto 2 [2. Change address (and/or checkVal) in RPInstaller.ini to yours. For Symbian 9.1 address is 60000148 for 9.2 it C0000148] para la distincion entre FP1 y FP2.


Parche para activar y desactivar accesos en el menu standbye: Busqueda WLan, Notas, Tareas y busqueda archivos

Customise Active Standby, Get Rid of Calender Entries, Search and Wlan Search

Imagen

You can get rid of Search, Calender Entries and Wlan Scanning

Here's How: Your gonna need a Hacked phone and Rom Patcher, i have provided rom patcher in the attachments

Código: Seleccionar todo
Step 1: Install Rom Patcher:

Installation:

1. First you need install MetroTRK on your mobile and launch it.

2. Change address (and/or checkVal) in RPInstaller.ini to yours.
For Symbian 9.1 address is 60000148 for 9.2 it C0000148

3. Launch RPInstaller.exe, select MetroTRK COM port and press Install

4. If no errors occurs then you have ROMPatcher installed on your mobile.

Now after Installing Rom patcher you should have a folder colder Patches in E drive. (E:\Patches\)

In the attachment there are 4 rmp files which you copy to E:\Patches\

Now once you copied the rmps MAKE SURE!!! That you turn off active standby or the patch will not work,

open rom patcher which should now appear in your menu after running RPInstaller.exe and you should see the patches

Heres what they do:

NoCalendarInActiveIdle= No Calender Entries
NoSearchInActiveIdle= No Search
NoTO_DOInActiveIdle = No Todos
NoWLANinActiveIdle= No Wifi scanning

just apply them by selecting options, patch, apply and once applyed exit from rom patcher and turn on active standyby

Important Note; On my n95 8GB rom patcher restarted my phone like 10 times before it worked, now i know this is annoying but this is the only way and eventually it works.


:arrow: http://cnshost.es/download.php?file=686 ... 43486e82c5






Crea tus propios parches: Haz que lea la memoria en "c" antes que en "z"

Imagen

c2z. Version 2008.05.11 By: FCA00000

Este programa genera un parche para móviles Symbian S60v3 que se aplica con ROMPatcher.

El propósito de este parche es forzar al teléfono a usar archivos de C: antes del mismo archivo en Z:

Por ejemplo, si tienes

c:\resource\apps\About.r01
Estonces se usará en vez de
z:\resource\apps\About.r01

Esto es útil para engañar a Symbian para que use tu propio archivo antes del original. Puesto que los archivos en C: se pueden leer y escribir, puedes modificarlos a tu gusto

Para activarlo necsitas un teléfono hackeado.

Extrae z:\sys\bin\EFSrv.dll
y cópialo al PC en la misma carpeta donde tengas c2z.exe y ejecuta c2z.exe

Esto hace ke se genere el archivo c2z.rmp (en la carpeta del PC)

Pásalo al móvil a e:\Patches y arranca el ROMPatcher y Carga el parche.

:arrow: http://cnshost.es/download.php?file=f37 ... a30b3993d7


Código: Seleccionar todo
Ejemplo de modificacion:

 1) copia z:\resource\apps\About.r01 a tu PC
   1.1) Si usas un teléfono no-inglés, usa el archivo About.r?? correcto. Por ejemplo, About.r04 para español.
   2) usando un editor Hexadecimal cambia cualquier palabra, pro ejemplo 'Nokia' a 'FCA00'
   3) copialo al móvil en c:\resource\apps\About.r01
   4) Arranca la aplicación herramientas->About
   5) deberías ver tu texto modificado





Parche para Cambiar la aplicacion por defecto con la tecla "0"

Imagen

Todos sabeis que desde la pantalla en modo espera manteniendo pulsada la tecla 0 del teclado aparece directamente vuestro buscador por defecto para internet. Pues bien, gracias al ya conocido Zorn, aplicando este parche desde RomPatcher y editandolo con el bloc de notas podemos hacer el uso de la tecla 0 para cualquier otra aplicacion.

1) Has de tener hackeado e instalado el RomPatcher.
2) Descarga el archivo y extraelo para modificarlo con el bloc de notas desde tu pc a tu gusto.
3) Has de saber la UID de la aplicacion en cuestion a utilizar. Puedes usar alguna app que muestre este dato como UidViewer o el mismo Tracker (Informacion de aplicacion en el TaskList)

EJEMPLOS:
FExplorer UID = 0xE00012DF therefore xxDIUxxx=DF1200E0
Calculator UID = 0x10005902 therefore xxDIUxxx=02590010
OperaMini UID = 0x101D3166 therefore xxDIUxxx=66311D10

En el siguiente caso si la UID es: 0xA0000BCD tendriamos que introducir: CD0B00A0

4) Metelo en la carpeta de tu tarjeta de memoria en la carpeta E:\Patches.
5) Inicia el RomPatcher y activa el parche.

Modificacion del Parche para que arranque X.Plore con la tecla "0" en lugar del navegador Web. Sustituir "CD0B00A0" por UiD que queramos:

Código: Seleccionar todo
; *** ChangeBrowserOnKey0 1.0 ***
; *** Change Browser On Key '0' ***
; Author: fca00000 , fca00000-at-yahoo-dot-es
; Date: 2008.06.01
; Firmware: tested on N80 v 5.0719.02 . Might work on preFP1+FP1
;
; When phone is in the StandBy screen, pressing key '0' opens the default browser.
; With this patch, you can open any other application.
; You need to know its UID. Then, swap bytes to little-indian to get xxDIUxxx. In other words: 0x12345678 becomes 78563412
; For example:
; FExplorer UID = 0xE00012DF therefore xxDIUxxx=DF1200E0
; Calculator UID = 0x10005902 therefore xxDIUxxx=02590010
; OperaMini UID = 0x101D3166 therefore xxDIUxxx=66311D10 In this case, be aware that it takes some time (5 seconds) to open.
;
; then, the patch becomes:
; SnR:sys\bin\phone.exe:398D00100000000000000000:CD0B00A00000000000000000
; SnR:sys\bin\phone.exe:398D00100100000035000000:CD0B00A00100000035000000

; As far as I know, nothing is broken. But I decline all responsability, of course.
; Anyway, here it is. Enjoy
; end of ChangeBrowserOnKey0
SnR:sys\bin\phone.exe:398D00100000000000000000:CD0B00A00000000000000000
SnR:sys\bin\phone.exe:398D00100100000035000000:CD0B00A00100000035000000


:arrow: http://cnshost.es/download.php?file=299 ... affbfbb730





Parche para Poner tu propio texto en el modelo de tu movil (*#0000#)

1. Crea un archivo llamado model.txt, y guardalo en E:/resource/version, si no existen las carpetas crealas en la tarjeta.
2. Escribir un texto en este archivo y guardarlo en formato UNICODE (Parece ser que el maximo para el texto es de 20 caracteres).
3. Copia el parche en su carpeta correspondiente.
4. Activar el parche y ver cambios con el codigo *#0000#

Código: Seleccionar todo
;own text for phone model
;this patch allow you to enter any text u want for your phone model (u can see it when u write *#0000#)
;
SnR:sys\bin\Phone.exe:5A003A005C007200650073006F0075007200630065005C00760065007200730069006F006E0073005C006D006F00640065006C002E00740078007400:45003A005C007200650073006F0075007200630065005C00760065007200730069006F006E0073005C006D006F00640065006C002E00740078007400


:arrow: http://cnshost.es/download.php?file=84c ... 551284d400





Parche para añadir Aplicaciones a arrancar con Comandos de Voz

Extra Voice Commands Patch

Código: Seleccionar todo
; *** ExtraVoiceCommands 1.0 ***
; *** Extra Voice Commands ***
; Author:: fca00000 , fca00000-at-yahoo-dot-es
; Date: 2008.06.27
; Firmware: tested on N80 v 5.0719.02 . Might work on preFP1+FP1
;
; When using the Headset/handsfree you can define voice commands to open applications.
; Unfortunatelly this allows only a restricted set of applications.
; With this patch, you can change to open any other program.
; You need to know its UID. Then, swap bytes to little-indian to get xxDIUxxx. In other words: 0x12345678 becomes 78563412
; For example:
; FExplorer UID = 0xE00012DF therefore xxDIUxxx=DF1200E0
; Calculator UID = 0x10005902 therefore xxDIUxxx=02590010
; OperaMini UID = 0x101D3166 therefore xxDIUxxx=66311D10 In this case, be aware that it takes some time (2 seconds) to open.
;
; then, the patch becomes:
; SnR:sys\bin\AppController.dll:XXdiuXXXxDIUxxx
;
; installed apps that can be changed:
; 0x101F4CCE, 0x10005A32, 0x100058CA, 0x101FFA86, 0x100058EC
; 0x10005901, 0x10005903, 0x101F4668, 0x101F84EB, 0x1000594E
; 0x100058C5, 0x101F4CD5, 0x1000594D, 0x101F8599, 0x10005A3E
; 0x10005907, 0x1000590B, 0x1000590A, 0x10005900, 0x101F8555
; 0x101F79B6, 0x10005234, 0x101F8512, 0x10008D39, 0x101F84D0
; 0x10005902, 0x101F4666, 0x101F4673, 0x101F467C, 0x101F4D91
; 0x101F6DE5, 0x10207A89, 0x101F86B4, 0x101F75B6, 0x101F8787
; 0x10204DAB, 0x101F876C
;
; Corresponding (not neccesarilly in same order!) to these applications :
; Voice mailbox-Bluetooth-Infrared-Voice recorder-Camera-
; Contacts-Calendar-Messaging-New message-New SMS-
; New MMS-New e-mail-Gallery-RealPlayer-Services-
; Go to-Themes-ToDo-Help-Conn. Manager
; Modem-Notes-Calculator-Converter-Voice comms-
; Clock-Memory card-Wallet-Log-Settings-App. Manager-
; Speed dial-File manager-IM-Presence-Positioning-
; Device manager-Radio-
;
; Example: change 'Conn. Manager' into 'CapsOn'
; Conn. Manager UID = 0x101F84D0 therefore XXdiuXXX=D0841F10
; CapsOn UID = 0xFCA0001E therefore xxDIUxxx=1E00A0FC
; so the patch is:
; SnR:sys\bin\AppController.dll0841F10:1E00A0FC
; now, open Tools->VoiceCommand->Options->NewApplication->Conn.Manager and Options->ChangeCommand->CapsOn
; and apply this patch using ROMPatcher
; press the button in the Headset/handsfree and say 'Capson'. It should open.
;
; As far as I know, nothing is broken. But I decline all responsability, of course.
; Anyway, here it is. Enjoy
; end of ExtraVoiceCommands
; this changes 'Calculator' to 'FExplorer'
SnR:sys\bin\AppController.dll:02590010F1200E0


[/quote]




EDICION por PsYcHo:

Open4All patch for ROMPatcher


The new Y-Drive/Modo hack is complicated, but many people already managed to make it work on their phones with firmware that resisted the old AppTRK and HelloCarbide hacks.

There's a problem, though. On many phones hacked with the new Y-Drive/Modo method, switching caps off does not give file managers like X-plore and ActiveFile access to system folders like c:\sys\bin.

This ROMPatcher patch takes care of that. When you let ROMPatcher run the Open4All patch, your file managers can get into the system folders.

Of course your phone has to be hacked and ROMPatcher has to be installed on your phone to make this patch work.


Credits: This patch was made by wadowice, who posted it on the symbian freak forum.

:arrow: http://cnshost.es/download.php?file=e94 ... d913ee16cf




EDICION por PsYcHo:

Parche para modificar los iconos de bateria, señal, mensajes, etc .. con rompatcher [by NokiaVista]

Patch: change the path of avkon2.mif

Change the path of the file from

z:/resource/app/avkon2.mif

TO

E:/resource/app/avkon2.mif

The file avkon2.mif contains the battery and signal and ... icons

Imagen


Código: Seleccionar todo
; *** Edit avkon2.mif ***
;NokiaVista
;Change the path of the file from z:/resource/app/avkon2.mif TO e:/resource/app/avkon2.mif
;Apply the patch ^-)

SnR:sys\bin\AknIcon.dll:7A003A005C007200650073006F0075007200630065005C0061007000700073005C00610076006B006F006E0032002E006D00690066:65003A005C007200650073006F0075007200630065005C0061007000700073005C00610076006B006F006E0032002E006D00690066


Ejemplo 4 archivos:

Ponel archivo "avkon2.r01" en "c/resource"

Pon los archivos "avkon mif" y los "mbm" en "c/resource/apps"

[Archivos tomados de N95-1 v3.0]

The folder 'avkon' containing all the avkon svg's, use smartsis to repack these files when adding your own icons every other icon has been jumbled up and needs changing to something new or to its original icon.


:arrow: http://www.mediafire.com/file/zyzfqzw2y ... rtooth.rar





INSTALLSERVER modificado para N96 CON Firm 12. Hay que ejecutarlo mediante Rompatcher:

Añadir el Patch en la carpeta Patchs del raiz de la tarjeta. Se ejecuta como cualquier otro parche desde la app Rompatcher.

Código: Seleccionar todo
; *** Patch: Installserver_N96_12_034 ***
; Installserver_N96_12_034
; Author: wadowice
; Date: 27-Feb-09
;
; This patch modifies z:\sys\bin\installserver.exe
; on N96 RM-247 v12.043
; to allow installing unsigned programs
; Thank-you to WiTch3d, ZoRn
abs:F90AEEF8:F8D029A9:002829A9
abs:F90AEF04:11D029A9:002829A9
abs:F90AF468:0B58904E:00230B50
abs:F90B25D0:002809D0:002809E0
abs:F90B31CC:401C07D0:401C07E0
abs:F90B56E8:1CD10198:1CE00198
abs:F90B85FC:70B50600:00207047


:arrow: http://cnshost.es/download.php?file=476 ... e99e685fca


EDICION por PsYcHo:

c2z Maker S60v3 SymbianOs9.x [Crea tu propio parche: c2z patch]


Imagen


This app is designed to let you make your own c2z patch on your phone and no need to use PC.

It's easy to use,select Options - Generate,and wait for a monent.
The c2z patch is generated in E:\c2z.rmp.
Cut it and paste it to E:\patches,open Rompatcher-- apply.
Enjoy!!!


Del idioma al


:arrow: http://cnshost.es/download.php?file=3d5 ... 5915ece4d9


EDICION por PsYcHo:

Patch: Call log for 12 months - by wadowice]


Registro de llamadas y mensajes para 365 dias en lugar de 30 max por defecto.

; *** Patch: Call log for 12 months ***
; Author: wadowice
; Date: 14-May-09
; Log application show calls and SMS received, missed, dialled.
; But store only 30 days.
; This patch setting on 365 days.
; -Apply patch.
; -Open Log application.
; -Settings.
; -Set Log duration = 30 days. Not true. It lay 365 days.
; -press OK.
; -verify: Select again. "No log is selected". This mean patch applyed.
; -no need to apply patch on boot.
;
; Why to do it? Because I store bad memory and don't want other programs.
;
; Important: probably need patch c2z4bin
; For some phones:
;SnR:sys\bin\Logs.exe:008D2700:8033E101
; For other phones
SnR:sys\bin\LogsPlugin.dll:008D2700:8033E101


Código: Seleccionar todo
For N96 users... use

SnR:sys\bin\LogsPlugin.dll:008D2700:8033E101


:arrow: http://cnshost.es/download.php?file=d16 ... e8a9e0694d


N95 reboot from the pulldown menu - BY marco0142 ]


Cambiar Apagado por Reincio en el menu del boton de apagado/encendido del telefono [Accion con un solo clic]

Copy the modified files SysAp.r05 in C: \ Resource \ Apps, and the file RebootMenuN95.rmp in E: \ Patches Copy the modified files SysAp.r05 in C: \ Resource \ Apps, and the file in E RebootMenuN95.rmp: \ Patches


EDIT: If any of you post on SysAp.exe of N78 and N90 and its SysAp.r05, I create the patch for these phones (but already now tell you that I have no chance to test it once because I have only an N95-2) EDIT: If any of you post on SysAp.exe of N78 and N90 and its SysAp.r05, I create the patch for these phones (but already now tell you that I have no chance to test it once because I only have an N95-2)

I looked at the strings of the other cell: I thought it was easier and instead I realized personally for qesti terminals are not able to create the patch (at least for now) I looked at the strings of the other cell : I thought it was easier and instead I realized qesti personally for terminals are not able to create the patch (at least for the moment)


Del idioma al


The patch is for any language phone:

Its the .R0* file you need to copy it from Z/resource/apps (what ever language you use)
Copy it to root of memory card (for now), edit it with xplore, 'edit chars' on the right you will see the word 'switch_off!'
Just change these letters to whatever you want and hide the spare letters with blank spaces (space=quick key press 0)
Remember 'switch_off!' has 11 digits. So you only have 11 digits to play with and dont make any mistakes when your done put the file in C/resource/apps and reboot phone to activate the file.


Edited file:

Imagen

Original file:

Imagen

You can also change the words 'lock phone' and 'lock keypad' using this file if you wanted


:arrow: http://cnshost.es/download.php?file=6df ... f748d68581



Disable Red Camera Light - Rompatcher (only for N85/5800)



First of all, I hope it's not a repost.. as tried to search but the title is a bit short and strange, couldnt find out..

Ok now a bit of info about this patch....

Once you enable it from your rompatcher, it will disable the red camera light while you take your pics.., if you disable and enable it again..., it will disable the red camera light this time..

Till now it's only working on N85/5800 and now edited N96 patch too....

Well credit goes to wadowice, SF and all others who made this possible.

The patch for N85 patches the z:\sys\bin\campdd.pdd file to do this.., some more phones do have this file, but somehow it's not working on their phones..

N96 patch patches z:\sys\bin\vpip.pdd

Anyways who has these phones, enjoy...

Thanks to gwegdabest for providing N96 patch.


Del idioma al


:arrow: http://cnshost.es/download.php?file=730 ... 9c317b8b02


Patch: LED_on_foto 5800 V11 By Marshall.87


:arrow: http://cnshost.es/download.php?file=055 ... 72a1cd88c9


Patch : screensaver disable by billoo


**screensaver disable by billoo***
; *** displays no screensaver it was requested ..
; i am using it from a week it is good and useful when you copy big or large no of files etc ***
; Author: billoo
; Date of making: 30.05.09
; Firmware: tested on N95-1 v30 .[ Might work on preFP1+FP1 ]


disable screensaver

It would be useful to have this hack when using tvout connection. I always have to kill screensaver to use my n82 with my car's 7'' lcd screen. 8mins is not enough[/quote]
note dont get scared if your rom pacther shos this icon

how to install
put this in e:/patches
then use rom patcher to apply it


Del idioma al


:arrow: http://cnshost.es/download.php?file=6d0 ... 47caa431fa


Patch: ChangeKeyTune by wadowice & Basil


Imagen

; *** Patch: ChangeKeyTune ***
; Author: wadowice & Basil
; Date: 31-May-09
; Thanks to NewLC and Srinivas for code sample.
;
; When you press any key, a short beep is played.
; This patch changes the beep into a tune of 8 tones.
; You need the patch C2Z started on boot. Use domainsrv.exe for this.
; Copy Z:\Resource\Avkon.r01 to your PC .
; Edit using a hexadecimal editor.
; Search 34127856EA03 and change to 341278560A04
; Search 341278560A04 and change to 34127856EA03 . Note: it's different address !
; Copy from PC to C:\Resource\Avkon.r01
; Restart.
; Avkon.r01 is for english speak. r02=french, r45=Croatian
;
; How to make your own tune:
; Search 4015 7605 4008 7305 4008 7805 4008 7605
; These are 8 notes. First byte is the frequency-0x40, second is duration.
; For a sample, 7605 is:
; frequency = 0x76-0x40 = 0x36 hertzes. Use values between 0x60 and 0x80.
; time = 05 = 5 miliseconds. Use values over 0x03
; And 4015 is:
; frequency = 0x40-0x40 = 0 = silence
; during 0x15 = 21 milliseconds
; For a sample, a quick descending tune:
; 4003 7803 4003 7503 4003 6F03 4003 6603
; It's difficult making new tones: we're working on it :-)




Patch: ShortMultiTap BY wadowice



; *** Patch: ShortMultiTap ***
; When press a key in Notepad/SMS/Contacts you must wait 1 second before
; it shows, so that you can type a new one.
; This patch reduces the time to 0.5 seconds, for experienced typists.
; The repeat rate 0.6 seconds is also reduced: the long-press becomes 0.3
SnR:sys\bin\ptiengine.dll:40420F00:20A10700
SnR:sys\bin\avkon.dll:C0270900:E0930400
;
; For slow typists, these will double the values: LongMultiTap
; SnR:sys\bin\ptiengine.dll:40420F00:80841E00
; SnR:sys\bin\avkon.dll:C0270900:804F1200


:arrow: http://cnshost.es/download.php?file=95d ... 5918754edc



Patch: Notepad lock by billoo




Author: billoo
Date of making: 27-may-09
Firmware: tested on N95-1 v30 .[ Might work on preFP1+FP1 ]
thanx to all dev on sf+teo
Tested on N95 v30

when i give my phone to someone i use this patch so he cant explore my notes
when you apply this patch you may get a ! sign dont take care of it just
open the notes and they will not open
just as secure as in lock


Note:
dont care if your rom pacther show this icon. it does so in my friends cell screenshot

how to install
put this in e:/patches
then use rom patcher to apply it..


Del idioma al


:arrow: http://cnshost.es/download.php?file=f6c ... 0ffc579057


patch : Sim Directory disable by billoo



Author: billoo

; ***SimDirectory disable by billoo***
; *** displays ***
; 1] displays nothing when someone opens his sim directory from contact
; displays nothing when someone trys to open the sim messages
; so it acts as a lock for them i think no app is dong this for us
; so have it and enjoy
; Date of making: 30.05.09
; Firmware: tested on N95-1 v30 .[ Might work on preFP1+FP1 ]



how to install
put this in e:/patches
then use rom patcher to apply it..


Del idioma al


:arrow: http://cnshost.es/download.php?file=525 ... 22d95f5fb7


Patch : Remove beep beep Record Tone for build in recorder (fixed for some handsets)



I know it's not so useful because there are already lots of beepless call recorders available, whatever ....

Patch-Remove Recording Tone. The elimination of telephone conversation records.

The patch default is n96 but works for Nokia: 6120, e51, 5700, N82, N95, N73, N78 and 6220c.

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Patch: Remove Recording Tone.
The elimination telephone conversation records the BB sound;


Use: the rmp patch puts e:\patches, in rompatcher begins using, please act according to your type choice patch, erases in front of snr “; ”, other types add in front of snr “; ” shield. ;
The patch default is n96.


Del idioma al



; N96
SnR:sys\bin\anserver.dll:400D030030750000:400D000030750000
;
;6120,e51,5700
;SnR:sys\bin\AudioServer.dll:400D030070B586B0:400D000070B586B0
;
;N82,n95,n73
;SnR:sys\bin\AudioServer.dll:400D030010B50169:400D000010B50169
;
;n78
;SnR:sys\bin\saAudioServer.dll:400D030040A7CD83:400D000040A7CD83
;SnR:sys\bin\saAudioServer.dll:AF204D4F:01204D4F
;
;6220c
;SnR:sys\bin\saAudioServer.dll:400D030050178280:400D000050178280
;SnR:sys\bin\saAudioServer.dll:AF20524F:0120524F


THANKS
--- CTG ---

:arrow: http://cnshost.es/download.php?file=58a ... 211e53423e




Edicion por Psycho:

Añado parches para 5800 ofrecidos en otro hilo por Littlenano:

Parches para S60v5 Os9.4 [5800]


Call log--> Aumenta la capacidad del registro de llamadas
Remove record tone--> Para eliminar el pitidito de las grabaciones
Remove red led-->Elimina la luz roja de las fotos y los videos
Short multitap--> Segun entendi, hace que el telefono reconozca mas rapido las teclas al escribir un mensaje por ejemplo(no estoy seguro)
Installserver--> Para hackear la v21


:arrow: http://www.mediafire.com/?0wtjzznjzmw




[Parche Rompatcher] NoHidePassword SymbianOs9.x [Hack]


Imagen


Patch: NoHidePassword by wadowice

Código: Seleccionar todo
; *** Patch: NoHidePassword 1.0 ***
; Author: wadowice
; Date: 05-Oct-09
; Greetings to Asterolykos, Il.Socio, psipsina.
; Developed under www.symbian-freak.com
; Tested on N96 . If red cross, show avkon.DLL
;
; At settings password display at "*****". This patch show full password at setting.
; As a sample: Settings->Connection->Remote Drives->New Drive->Password
; As a sample: Settings->Connection->XDM profile->New XDM profile->Network Password
; As a funny sample: Settings->Connection->SIP settings->Profile->Proxy server->Password . It work only before save.
; As a non sample: Settings->General->Security->Phone and SIM->Lock Code . It display always "****"

#IFDEF MACHINE_20002D82
; N96 use ARM code
SnR:sys\bin\avkon.DLL:0F02D0E370008412:0F02D0E35C008412
#ELSE
; Other phone use THUMB code
; not tested
SnR:sys\bin\avkon.DLL:01D0703010BD:01D05C3010BD
#ENDIF


Tested on N85 v30

Descarga




[Parche Rompatcher] AllowRenameAndRemoveFolders OS9.x [Hack]


Patch AllowRenameAndRemoveFolders by Wadowice

Código: Seleccionar todo
; *** Patch: AllowRenameAndMoveFolders ***
; Author: wadowice
; Date: 28-Jun-09
; Greetings to Rol@N95d, megaexer, asterolykos.
; Tested on N96 . If red cross, show menu2.exe and menumodel.dll
; If yellow triangle, some things work, others not.
;
; In the Menu, show new commands for:
; -rename applications. This is useful.
; -move folders inside folders. Also useful.
; -icon animation: don't use. Always crash.
; -memory details.
; -remove applications.
SnR:sys\bin\menu2.exe:68696464656E00:69696464656E0 0
SnR:sys\bin\menumodel.dll:01D0002070470120:01D0012 070470120
SnR:sys\bin\menumodel.dll:01D0002070470120:01D0012 070470120
SnR:sys\bin\menumodel.dll:01D0002070470120:01D0012 070470120
SnR:sys\bin\menumodel.dll:00D000207047:00D00120704 7
SnR:sys\bin\menumodel.dll:00D000207047:00D00120704 7


Para los que prefieran crearse sus propios archivos ".rpm" aqui dejo los codigos:

FP1

Código: Seleccionar todo
; *** Patch: AllowRenameAndMoveFolders fp1_mr***
; Author: wadowice
; Date: 28-Jun-09
; Greetings to Rol@N95d, megaexer, asterolykos.
; Tested on N96 . If red cross, show menu2.exe and menumodel.dll
; If yellow triangle, some things work, others not.
;
; In the Menu, show new commands for:
; -rename applications. This is useful.
; -move folders inside folders. Also useful.
; -icon animation: don't use. Always crash.
; -memory details.
; -remove applications.
SnR:sys\bin\menu2.exe:68696464656E00:69696464656E00
SnR:sys\bin\menumodel.dll:00207047012070473438F6E7006E002801D000207047012070473438F6E7406E002801D00020:01207047012070473438F6E7006E002801D001207047012070473438F6E7406E002801D00120


FP2
Código: Seleccionar todo
; *** Patch: AllowRenameAndMoveFolders fp2***
; Author: wadowice
; Date: 28-Jun-09
; Greetings to Rol@N95d, megaexer, asterolykos.
; Tested on N96 . If red cross, show menu2.exe and menumodel.dll
; If yellow triangle, some things work, others not.
;
; In the Menu, show new commands for:
; -rename applications. This is useful.
; -move folders inside folders. Also useful.
; -icon animation: don't use. Always crash.
; -memory details.
; -remove applications.
SnR:sys\bin\menu2.exe:68696464656E00:69696464656E00
SnR:sys\bin\menumodel.dll:00207047012070473438F6E7006E002801D000207047012070473438F6E7406E002801D00020:01207047012070473438F6E7006E002801D001207047012070473438F6E7406E002801D00120
SnR:sys\bin\menumodel.dll:002070473438F6E70100C96E0120002900D00020:012070473438F6E70100C96E0120002900D00120


Descarga




[Parche Rompatcher] Bloquea tu red OS9.x [Hack]


Patch : Lock up your Network UI app by billoo and mindvision***

Código: Seleccionar todo
; Author: billoo , mindvision at patchers dev sec
; ***[patch] lock up your network ui app by billoo and mindvision***
; Date of making: 09.09.09
; Tested on N95 v 30.0.15

rel:sys\bin\SATUI.EXE:00000003:10:00
rel:sys\bin\SATUI.EXE:00000000:7a:00
;rel:sys\bin\SATUI2.EXE:00000003:10:00
;rel:sys\bin\SATUI2.EXE:00000000:79:00

If blocks your Network provider app in your phone, e.g. if you use Airtel's SIM card in India, you would have an app named SIM Services or Airtel Services. You can access news, sms etc through it, though every SMS would be charged more about your normal SMS charge.


Del idioma al


Descarga




[Parche Rompatcher] USB Disable + Disable notification OS9.x [Hack]


Patch : USB Disable + Disable notification by Billoo

Código: Seleccionar todo
; Author: billoo
; USB Disable + Disable notification by billoo
; Date of making: 06.07.09
; Tested on N95
; 1] when you apply it and insert usb nothing will happen and no onecan
; copy your data from pc without your consent...
; 2] when you apply the patch and then disable it again ...now when you
; insert your usb inside it it will automatically start in pc suit mode and
; there will be no notification and no confirmation.

rel:sys\bin\usbuinotif.dll:00000003:10:00
rel:sys\bin\usbuinotif.dll:00000000:79:00
;SnR:sys\bin\sysap.exe:03D1E06A09F002EB7DE0:03D13801FEF7FCFA7DE0


*I am doubtful that why did the author put a ; in front of the last line of the code as that would make the last line of no use, however if this code won't work in your phone, try to remove the ; in front of the last line and try again.., if that wont work even then, it won't work then..


Del idioma al


Descarga


[Parche Rompatcher] BigIcons v2 OS9.x [Hack]


NORMAL


Imagen


MODIFICADO


Imagen


*Icons Size: 90 60 11 6

The program BigIcons.exe produces a patch that makes big icons in menu.

1- To use it, transfer z:\sys\bin\xngridfactory.dll to your PC.
2- Run BigIcons.exe 105 70 22 12 xngridfactory.dll
3- This generates file BigIcons.rmp .Transfer to your phone and apply using ROMPatcher.

(NOTE: The file xngridfactory.patched.dll is useless.)


BigIcons.exe takes 5 variables:

width, height, positionX, positionY, filename

The icons are proportionated 3:2 so 105=70*3:2
If not, Menu will adjust them.

Normal: 75 50 0 0
Big: 105 70 22 12
Huge: 129 86 28 17

MUST WOKS WITH ALL PHONES [Maybe not in 5800 & N96]
Working in N95-1 v30


Descarga



[Parche Rompatcher] Alarma con tiempo extendido Os9.x [Hack]


patch : Extend Alarm Time by CODerus (fixed by segalgx)

Código: Seleccionar todo
; *** Extend Alarm Time ***
; Author: CODeRUS
; Date of making:2009-10-8
; fix:segalgx
; transleted:edibala
; Custom alarm ringing duration of the default patch to modify the original 1 minute to 10 minutes
; Patch use: rmp patch into e: \ paches, rompatcher patch is enabled, if it is turned off an alarm, need to use ; domainsrv.exe boot loader patch (see c2z4bin).
; Custom Time: 10 minutes - "600 seconds -" 600,000 milliseconds - "600,000,000 microseconds -" 16 hex: 23C34600-"patch (high status of swap): 0046C323
; Default 6120c use, according to its own models, remove the patch in front of shield ";" a semi-colon, other models patch the code with ";" shield
; 6120c,5700
snr:sys\bin\AknAlarmService.dll:8000879303:800046C323
; n78,6220
;snr:sys\bin\AknAlarmService.dll:8100879303:810046C323
; n95,82
;snr:sys\bin\AknAlarmService.dll:8200879303:820046C323
; samsung i8510 INNOV8
snr:sys\bin\AknAlarmService.dll:8300879303:830046C323


Descarga


[Parche rompatcher] Ocultar Menu Multimedia S60v3 Os9.x [Hack]


La finalidad de este parche, por si te lo preguntabas, es que cuando estes jugando y por error pregsiones la tecla multimedia no se abra el menu.

Patch : Multimedia Menu Disable by Billoo

Código: Seleccionar todo
; Author: billoo
; **Multimediamenu Disable***
; Displays a fake error when you press Multimedia Menu button
; Alternative is delete the anykey process from jbak
; Date of making: 23.06.09
; Firmware: tested on N95-1 v30 .[ Might work on preFP1+FP1 ]


Why this?
so that when playing games if you press it by mistake it can save you from it...


Del idioma al



Código: Seleccionar todo
rel:sys\bin\multimediamenu.exe:00000003:10:00
rel:sys\bin\multimediamenu.exe:00000000:7a:00
;rel:sys\bin\multimediamenu2.exe:00000003:10:00
;rel:sys\bin\multimediamenu2.exe:00000000:7a:00


Descarga
alexzkterr escribió:
Con este parche y los archivos correspondientes ya no se abre el registro de llamadas, guia y mensajes, teniendo un inicio mas rapido y mas memoria ram al iniciar el 5800 xm, simplemente coloque el parche en la carpeta patches, ir al rompatcher y ponerlo de autoinicio, colocar los archivos de la descarga en c://resource y reiniciar. Al reiniciar se puede comprobar con el jbaktaskman que dichas aplicaciones ya no estaran abiertas.

Buscaba algo asi, y al final tachan!

DESCARGA VIA 2shared~~> Descarga
DESCARGA VIA depositfiles~~> Descarga
DESCARGA VIA Hotfile~~>Descarga

Un abrazo.



BackON escribió:
RomPatcher+ v2.3 S60v3/S60v5 SymbianOs9.x (Final Version)


ImagenImagen


As almost all of you know this software is for aplying patches to rom memory
( come on its the name of it)
ok here is the new version and the change log
Change-Log v2.2 > v2.3:
+ New: now RP+ can be integrated in the cooked ROM firmware
+ New: added Universal InstallServer patch (N95 and many other devices are supported too)
+ Fixed: issue when two patches were using the same shadow-page. When one patch got disabled, the other patch got disabled too.
+ Improved: patches are now installed during first launch of RP+ using the file RP_Patches.zip
+ Removed: installer executable is now useless, since the RP_Patches.zip will be processed by RP+ during first launch.
I almost forgot this:
How to install:
There are 3 different ways to install RomPatcher+
1) If your phone has been hacked to allow installation of unsigned .sis then install RomPatcherPlus_2.3.sis
2) If your phone has been hacked and has the Leftup root CA, then just install the RomPatcherPlus_2.3.sisx
3) Otherwise, use your DevCert or OpenSigned online to sign and install the "Lite Version". But, in this case, you MUST also manually copy BOTH the files patcher.ldd and patchershadow.ldd in c:\sys\bin\ folder
Patcher.ldd Not Found Error:
If you launch RP+ immediately after it has been installed you could get the "patcher.ldd not found" error.
Just reboot the device and launch again RP+
Descarga
Última edición por PsYcHo el 05 Apr 2010, 19:38, editado 22 veces en total
Razón: << Completar el hilo con nuevos Parches >>
Avatar de usuario
Ex-Staff
Ex-Staff
 
Publicaciones: 5235
Unido: 14 Feb 2004, 01:00
Ubicación: Madrid
Sexo: Masculino
Modelo de móvil:  iPhone 5 32Gb blanco 6.1 JB
 MacBookPro 13" Mountain Lion 10.8.2
 AppleTV 4.3 JB  Apple Remote
 iPad Mini 16Gb 3G blanco 6.1 JB
 Magic Mouse  iPad Keyboard Dock

por RAYCO » 28 Apr 2008, 23:59

joer, qué interesante se pone el tema!! :o

gracias pummette
Avatar de usuario
Legendario
Legendario
 
Publicaciones: 8752
Unido: 24 Jan 2004, 01:00
Ubicación: Lanzarote
Sexo: Masculino
Modelo de móvil: iPhone 4 (firm 4.3.3 jailbreak)
en reserva: N95 (firm 21 hack)

por DaNiOnEz » 29 Apr 2008, 01:19

buff no piyo casi nada,voi a instalarlo aora xo aun asi alguien podria explikar algo + de esto? 8O 8O 8O
Avatar de usuario
Se Defiende
Se Defiende
 
Publicaciones: 246
Unido: 11 Jan 2005, 01:00
Sexo: No especificado

por HUDINY » 29 Apr 2008, 17:56

Que hago lo instalo y ya esta para que sirve una pequeña muestra de luz no????
Avatar de usuario
B A N E A D O
B A N E A D O
 
Publicaciones: 6393
Unido: 20 Dec 2004, 01:00
Ubicación: Malaga La Bella
Sexo: Masculino
Modelo de móvil: NOKIA 5800 16GB ACTUALMENTE

por polotdi_temp » 29 Apr 2008, 19:17

pummette,cuentanos algo que no tenemos ni idea :?
Avatar de usuario
polotdi_temp
 

por digor » 29 Apr 2008, 19:19

Si,seria de gran ayuda un poco de informacion en español porque no tengo ni ideaa
Avatar de usuario
Da Guerra
Da Guerra
 
Publicaciones: 301
Unido: 24 Apr 2004, 01:00
Ubicación: MeRiDa
Sexo: No especificado

por jose_sonseca » 29 Apr 2008, 19:29

Mmm, recuerdos del vissie y los siemens...

A ver si hago el hack en el mio (y eso que tengo el hack de ROM de firmware) y pruebo estas cosas.
Adicto
Adicto
 
Publicaciones: 2306
Unido: 22 Aug 2005, 01:00
Ubicación: Algo mas abajo de Toledo
Sexo: Masculino
Modelo de móvil: N85 30.101
Nokia N80 IE 5.0719.0.2
HTC Pharos P3470 WM6
Nokia 6600 5.53

por HUDINY » 30 Apr 2008, 16:05

A la espera estamos hermano :wink:
Avatar de usuario
B A N E A D O
B A N E A D O
 
Publicaciones: 6393
Unido: 20 Dec 2004, 01:00
Ubicación: Malaga La Bella
Sexo: Masculino
Modelo de móvil: NOKIA 5800 16GB ACTUALMENTE

por jer-frand » 30 Apr 2008, 17:26

Hola.
Esto es un "cargador" q permite ejecutar parche para modificar ciertos aspectos de la rom del movil.
Lo primero q se tiene q hacer es todo el proceso para q el movil tenga acceso a las carpetas ocultas y de sistema.
Luego ya se puede ejecutar normalmente el romparche.
Lo q se hace es poner los parches en diferentes carpetas de sistema y luego cargarlos para conseguir alguna "mejora".
Por ejemplo se puede acceder a un menu oculto, quitar el sonido de la camara al echar una foto, instalar aplicaciones sin firmar, sin tener q echar mano del capsoff y demas.
Lo malo es q al reiniciar el movil los parche se borran, con lo q es necesario volver a meterlos en las carpetas de sistema y volver a ejecutarlos.
Un saludo.
Ta' lego.
Avatar de usuario
Amo
Amo
 
Publicaciones: 2118
Unido: 29 Nov 2004, 01:00
Ubicación: Ciudad De Los Califas. (CÓRDOBA).-
Sexo: Masculino
Modelo de móvil: Iphone 4 16GB.-

por HUDINY » 30 Apr 2008, 17:32

Y quitarle el led rojo en la grabacion de videos y cambiarlo por el flash ???Se podria hacer eso en los n95???
Avatar de usuario
B A N E A D O
B A N E A D O
 
Publicaciones: 6393
Unido: 20 Dec 2004, 01:00
Ubicación: Malaga La Bella
Sexo: Masculino
Modelo de móvil: NOKIA 5800 16GB ACTUALMENTE

por jer-frand » 30 Apr 2008, 17:47

Hola.
HUDINY escribió:Y quitarle el led rojo en la grabacion de videos y cambiarlo por el flash ???Se podria hacer eso en los n95???


Estamos hablando de un "cargador" q lo unico q hace es cargar el codigo q se le diga y modificar la rom.
Es como python, q carga la aplicacion y luego la ejecuta.
Si alguien consigue "programar" un parche q apague la luz roja y use el flash, pues claro q se podria.
Pero hoy por hoy aun no hay nada de eso.
Un saludo.
Ta' lego.
Avatar de usuario
Amo
Amo
 
Publicaciones: 2118
Unido: 29 Nov 2004, 01:00
Ubicación: Ciudad De Los Califas. (CÓRDOBA).-
Sexo: Masculino
Modelo de móvil: Iphone 4 16GB.-

por HUDINY » 01 May 2008, 10:44

Gracias hermano,creo que va a ser mas facil desmontarlo y quitarle el puto led :wink:
Avatar de usuario
B A N E A D O
B A N E A D O
 
Publicaciones: 6393
Unido: 20 Dec 2004, 01:00
Ubicación: Malaga La Bella
Sexo: Masculino
Modelo de móvil: NOKIA 5800 16GB ACTUALMENTE

por PsYcHo » 01 May 2008, 12:42

pummette, el TRK es el mismo que tenemos ya para el Hack? ... Esto se esta poniendo muy pero que muy interesante :lol:

Este tal ZoRn y el amigo FCA00000 son unos fieras! El de los menus ocultos me llama la atencion. Pero claro .. cada vez que reiniciemos ¿Tendremos que hacer el proceso de la ROM via PC si queremos aplicar alguno de los parches?

Gracias por la info, edito el Titulo para dejar mas claro por donde vá el contenido del hilo, ok?
Avatar de usuario
Legendario
Legendario
 
Publicaciones: 14376
Unido: 23 Mar 2004, 01:00
Ubicación: Madrileño en tierras Tinerfeñas
Sexo: Masculino
Modelo de móvil: Samsung Galaxy S3 Libre Stock Rom JB 4.1.2 Root+Mods
Tablet Acer a700 JB 4.1 Stock Root

por blueberto » 01 May 2008, 13:20

Yo nunca apago el movil.....solo lo dejo fuera de linea por las noches...tampoco es tan dificil...jeejej....aunque claro, de vez en cuando necesita un reseteo para agilizar.... :disimular:
Avatar de usuario
Legendario
Legendario
 
Publicaciones: 17388
Unido: 14 Jan 2004, 01:00
Ubicación: En el centro de MI universo (Madrid)
Sexo: Masculino
Bandera nacional:
Spain
Modelo de móvil: iPhone 4s 16 gigas Jail!
iPad2 16 gigas 3g-wifi jail

por PsYcHo » 01 May 2008, 13:31

Yo tampoco lo apago, pero como bien dice a veces se queda colgado o es menester reiniciar a causa de alguna instalacion. Asi que es bueno saber si esto se puede aplicar bajo demanda y en el propio movil o es necesario tirar de Pc.

Yo ya me he preparado los 4 archivos .rmp con los parches en el Pc para soltarlos en la ruta del movil, aunque ahora me voy a poner con la comida y ya depsues si puedo me pongo a ello.
De momento veo que en el .ini del lanzador tiene un primer apartado con el numero del puerto. Me imagino que este habrá que cambiarlo tambien con el puerto que tengamos nosotros para el movil, no? Despues se indica tambien en el .exe y por ultimo instalar.

La ultima duda .... ¿pummette, sabes de donde sacar el sonido (.wav): "nocamsound.wav" para el parche de NoCamSound? O ... ¿Simplemente hacemos un sonido "sin sonido" para aplicarlo? Yo tengo un .wav para el modo silencio que es un clip de sonido que no suena, solo vibraria en caso de llamada o mensaje, asi que ese mismo puede valer, supongo.
Avatar de usuario
Legendario
Legendario
 
Publicaciones: 14376
Unido: 23 Mar 2004, 01:00
Ubicación: Madrileño en tierras Tinerfeñas
Sexo: Masculino
Modelo de móvil: Samsung Galaxy S3 Libre Stock Rom JB 4.1.2 Root+Mods
Tablet Acer a700 JB 4.1 Stock Root

Siguiente

Quién está en línea
Usuarios navegando en este foro: No hay usuarios registrados and 1 invitado
cron